Forming By Bending

Product Description

Forming by BendingTechnical Description of Forming by BendingThe experimental set-up enables fundamental experimentation in the mechanics of deformation. Flat rods can be permanently deformed by means of a simple bending device. The necessary deformation work, e.g. to produce a 90 angle, is recorded in the experiment using a force measurement system. A range of different materials and bend radii can be investigated using this experiment. The experiments should be conducted in a workshop environment, as the bending device has to be clamped into a vice. A suitable force measuring device and a wide range of specimens are supplied. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.Specification of Forming by Bending Experimental set-up for deformation experiments on flat sections Bending device for insertion in a vice Device to measure the deformation forces Rotatable moulding to allow for 4 different bend radii Deformation forces on the lever up to 200N Technical Data of Forming by Bending Bending device Lever length: 500mm Bend specimens Cross-section: 10x6mm Material: steel, copper, brass, aluminium Force measuring device: 200N Bend radii: R1, R2, R4, R8 Dimensions and Weight of Forming by Bending l x w x h: 640x120x100mm Weight: approx. 10kg