Experiments With An Action Turbine

Product Description

Experiments with an Action Turbine Technical Description of Experiments with an Action Turbine Action turbines operate according to the principle of equal pressure. The static pressures at the inlet and at the outlet of the impeller are equal. The experimental unit is placed upon the base unit. The two units together provide the basic experiments to get to know the operating behaviour and the most important characteristic variables of action turbines. The water jets are discharged with high velocity from four nozzles of the distributor. The water jets are deflected in the turbine impeller and put it in motion. The axially discharged water from the turbine impeller can be observed. The number of active nozzles can be adjusted by valves. The eddy current brake generates a defined load. The eddy current brake is specially developed by.The torque delivered by the turbine is determined via an electronic force sensor. The speed is measured with an optical speed sensor.Specification of Experiments with an Action Turbine Turbine to place upon the base unitFunctioning and operating behaviour of an action turbineTransparent housing for observing the turbine impellerDistributor with 4 nozzles, active nozzles adjustable by valves Constant pressure of the turbine represents in practice the height difference and is adjusted viaTurbine load using the wear-free and adjustable eddy current brakeForce sensor to determine the torque on turbine shaftOptical speed sensor for measuring the turbine speedTechnical Data of Experiments with an Action Turbine TurbinePower output: approx. 28W at 3.600min-1Rotor diameter: 50mmMeasuring rangesTorque: 0..0,5NmSpeed: 0...9.000min-1Dimensions and Weight of Experiments with an Action Turbine LxWxH: 420x320x180mmWeight: approx. 7kg