Experimental Module Rolling Sliding Disc

Product Description

Experimental Module Rolling Sliding Disc Technical Description of Experimental Module Rolling Sliding Disc The slip forces between two rotating friction discs in contact can be determined using this accessory module. The unit is intended for operation with the basic module. Connection to the basic module is made using a clamped coupling. The slip between the discs is maintained at a constant 4% by a gearbox. The contact pressure can be adjusted in steps (10N) up to max. 80N.This adjustment is performed using a lever with a mechanical advantage of 2: 1. A strain gauge force transducer connected to the controller measures the friction forces directly. The unit has a container for supplying lubricant. Knurled bolts enable the friction discs to be changed easily. Specification of Experimental Module Rolling Sliding Disc Supplementary experiment on slip forces between two rotating discs in contactFriction discs 53mm diameter, materials: aluminium/rubberGearbox ratio i: 0.96Strain gauge transducers for friction force 0...50NWeight set up to 40Nl x w x h 490x280x150mm Technical Data of Experimental Module Rolling Sliding Disc Friction discs Diameter: 53mmMaterials: aluminium/rubberGearbox ratio: i = 0.96Strain gauge transducers for friction force: 0...50NWeight set up: to 40N Dimensions and Weight of Experimental Module Rolling Sliding Disc l x w x h: 490 x 280 x 150 mmWeight: approx. 10 kg