Turbojet Engine Test Stand

Product Description

Description of Turbojet Engine Test Stand:

We have developed a turbo jet engine test stand to provide a cost effective method of testing the performance of an operational aero jet engine. The turbo jet test stand is mounted on a wheeled trolley allowing it to be moved to an operational area or stored in a convenient location. The test stand provides a fully functioning and instrumented engine. The engine used incorporates a single stage centrifugal compressor, feeding air into a combustion chamber fed by multiple fuel injectors, and through to a single stage centrifugal turbine.

Experimental Capability of Turbojet Engine Test Stand: 

1. Demonstration of the Turbo jet principle
2. Performance analysis of a Turbojet at varying power

Specification of Turbojet Engine Test Stand:   

A trolley mounted single shaft turbojet designed for flight is to be supplied so as to demonstrate the turbojet principle. It is to be instrumented, so as to all allow a performance analysis of the turbojet at various speeds to be undertaken. The unit should alternatively be provided with a physical mimic diagram plate or be instrumented for data acquisition and a digital mimic diagram. Thrust produced must greater than the range up to 230N and be measured electronically. Speed is to be up to 110,000 rpm and full power pressure is to be over 2 bar. The fuel is to be kerosene.