Torsion And Bending

Product Description

Torsion And Bending

Description of Torsion And Bending

The Torsion And Bending apparatus is used for torsion and bending tests on different materials. Torsion And Bending is to be used with Universal Base Frame or Universal Structural Frame. The apparatus consists of two columns attached to the base frame. One column has a top support for bending specimen, and a clamp for torsion specimen. The other column also has a top support for bending specimen with a pulley freely rotes in the column. For bending test, the specimen is placed on or clamped to the supports on top of the columns. Load is applied to the specimen and deflection is measured by a dial gauge. For torsion test, one end of the specimen is clamped to the column, and the other end is clamped to the pulley. A lever arm is attached to the specimen at any length from the first column. Angle of twist is measured by a dial gauge for the lever movement. Torque is measured by the load and the pulley diameter.

Technical Data of Torsion And Bending

• Columns : One with fixed specimen clamp, and one with rotating specimen clamp.
• Supports : 2 ea round.
• 2 ea fixed with knife edge top.
• Load hanger : 1 ea
• Weights : 1 lot
• Specimens : Round 1 ea for steel, aluminum and brass.
• Flat 1 ea for steel, aluminum and brass.
• Dial Indicator : 1 required.