Milk Sterilisation Plant

Product Description

Milk Sterilisation Pilot Plant

Technical Specification of Milk Sterilisation Pilot Plant

1. Wheeled framework of AISI 304 stainless steel
2. Max. feeding: 100 l/h (higher flow rates on demand)
3. Cylindrical feed tank of AISI 304 stainless steel, mirror polished inside, with capacity of 80 l
4. Cylindrical tank of AISI 304 stainless steel, mirror polished inside, with capacity of 80 l, for collecting the sterilized product
5. Gear-type feed pump with body of AISI 316 stainless steel and flow rate of 200 l/h
6. Electronic frequency variator for feed pump
7. Feed flow meter of AISI 316 stainless steel, with range of 0 to 100 l/h, accuracy: ± 0.5%
8. Plate-type milk pre-heater of AISI 316 stainless steel, with exchange surface of 0.6 m²
9. Sterilization chamber of AISI 304 stainless steel
10. Vacuum chamber of borosilicate glass, with capacity of 5 l,for reducing milk temperature after sterilization
11. Liquid-ring vacuum pump, P = 0.7 kW, provided with air/water separator
12. Plate heat exchanger of AISI 316 stainless steel, for milk cooling, exchange surface of 0.6 m²

Milk Sterilisation Pilot Plant

1. Semi-Automatic Milk Sterilisation Pilot Plant        DIFT146/1
2. Automated Milk Sterilisation Pilot                          DIFT146/2

Semi-Automatic Milk Sterilisation Pilot Plant

1. A Milk Sterilisation Plant that simulates a UHT system with direct steam heating.
2. The milk is heated and then absorbed water from the steam is removed, followed by rapid cooling of the milk.

Automated Milk Sterilisation Pilot

1. Plant with SCADA
2. A Milk Sterilisation Plant that simulates a UHT system with direct steam heating.
3. The milk is heated and then absorbed water from the steam is removed, followed by rapid cooling of the milk. The plant is supplied with a PID controller and software.