Assembly Station Piston Compressor

Product Description

Assembly Station: Piston Compressor

Technical Description of Assembly Station: Piston Compressor

Compressors are at the core of compressed air generator plants. These plants are used where compressed air is used as a source of energy. Compressed air is often used instead of electrical energy, particularly in workplaces where there is a risk of explosion of combustible gases. The heat generated by compression is dissipated by cooling fins. The compressor is driven by a V-belt. A disassembled piston compressor is contained in the drawers of the trolley cabinet which also holds the tools and assembly aids, small parts and gaskets required for assembly. A second fully functional compressor, permanently mounted to the workbench, can be used for demonstration purposes. This enables references to be made between individual components and the Large-format drawings suitable for workshop practice can be attached to the display board at the rear of the trolley.

Specification of Assembly Station: Piston Compressor

• Assembly project for engineering training
• 2 Piston compressors: 1x set of components for assembly, 1x assembled, mounted on trolley as demonstrator
• Single-stage compressor, air-cooled, with fan flywheel, intake filter and pipe unions
• Compressor consisting of piston and cylinder, housing, driving gear, cylinder cover with valves
• Workshop trolley with rear drawing display board, built-under cabinet with 3 lockable drawers and vice with 115mm jaw width

Technical Data of Assembly Station: Piston Compressor

• Air-cooled single-cylinder piston compressor
• Cylinder bore: 50mm
• Stroke: 32mm
• Displacement volume: 63cm³
• Speed: 1850min-1
• Max. Pressure: 10bar
• Intake capacity: 115L/min
• Drive power output: 700W
• Dimensions, assembled: l x w x h: 223x256x314mm

Dimensions and Weight of Assembly Station: Piston Compressor

• l x w x h: 1520x795x1850mm (trolley)
• Weight: approx. 150kg